“Paper” Bottles For Your Fizzy Drinks (And Bottle Rockets)

A story that passed almost unnoticed was that the Coca-Cola company plan to run a limited trial of paper bottles. Wait, paper for a pressurized beverage? The current incarnation still uses a plastic liner and cap but future development will focus on a “bio-based barrier” and a bio composite or paper cap tethered to the vessel.

Given that plastic pollution is now a major global concern this is interesting news, as plastic drinks bottles make a significant contribution to that problem. But it raises several questions, first of all why are we seemingly unable to recycle the bottles in the first place, and given that we have received our milk and juice in paper-based containers for decades why has it taken the soda industry so long?

Plastic soft drink bottles are made from Polyethylene terephthalate or PET, the same polyester polymer as the one used in Dacron or Terylene fabrics. They’re blow-moulded, which is to say that an injection-moulded preform something like a plastic test tube with a screw top fitting is expanded from inside in a mould by compressed gas. As anyone who has experimented with bottle rockets will tell you, they are immensely strong, and as well as being cheap to make and transport they are also readily recyclable when separated from their caps.

The Perfect Product Turns Out To Be Less Perfect To Get Rid Of

img data-attachment-id="464731" data-permalink="https://hackaday.com/2021/04/23/paper-bottles-for-your-fizzy-drinks-and-bottle-rockets/1024px-plastic_bottles_for_recycling/" data-orig-file="https://hackaday.com/wp-content/uploads/2021/02/1024px-Plastic_bottles_for_recycling.jpg" data-orig-size="1024,768" data-comments-opened="1" data-image-meta='{"aperture":"0","credit":"","camera":"","caption":"","created_timestamp":"0","copyright":"","focal_length":"0","iso":"0","shutter_speed":"0","title":"","orientation":"0"}' data-image-title="1024px-Plastic_bottles_for_recycling" data-image-description="" data-image-caption="" data-medium-file="https://hackaday.com/wp-content/uploads/2021/02/1024px-Plastic_bottles_for_recycling.jpg?w=400" data-large-file="https://hackaday.com/wp-content/uploads/2021/02/1024px-Plastic_bottles_for_recycling.jpg?w=800" loading="lazy" src="https://hackaday.com/wp-content/uploads/2021/02/1024px-Plastic_bottles_for_recycling.jpg?w=400" alt="Used plastic bottles collected for recycling." width="400" height="300" srcset="https://hackaday.com/wp-content/uploads/2021/02/1024px-Plastic_bottles_for_recycling.jpg 1024w, https://hackaday.com/wp-content/uploads/2021/02/1024px-Plastic_bottles_for_recycling.jpg?resize=250,188 250w, https://hackaday.com/wp-content/uploads/2021/02/1024px-Plastic_bottles_for_recycling.jpg?resize=400,300 400w, https://hackaday.com/wp-content/uploads/2021/02/1024px-Plastic_bottles_for_recycling.jpg?resize=800,600 800w" sizes="(max-width: 400px) 100vw, 400px"">Used plastic bottles collected for recycling.Used plastic bottles collected for recycling. That’s a lot of space for not a lot of plastic. Radulf del Maresme, CC BY-SA 4.0

So if plastic bottles are such a handy products, why are we seemingly so bad at recycling them? At fault is their low density, there’s very little plastic in a typical drink bottle for something that takes up quite a lot of space even when crushed. Handling them requires significant infrastructure, and as a result in many cases they end up either discarded as litter or entering the regular trash stream. In Germany they take a different approach to the recycling problem by applying a deposit to each bottle and re-using them, thus German plastic bottles are much thicker-walled than those in use elsewhere. This however requires both the political will to mandate it and a nationally-organised bottle handling industry to service it, something few nations are likely to embrace.

PET bottles suffer from one problem though that isn’t shared by their glass equivalents, they are gas-permeable. I learned this to my cost when I was much younger, when I made a batch of cider in plastic bottles it turned into vinegar over a few months as small quantities of air were able to make it through the plastic. If you leave a carbonated drink for long enough in its bottle it will eventually lose its fizz, so there’s a lower limit on the thickness of their plastic that doesn’t apply for short-shelf-life products in Tetra-Paks such as that milk or juice. So whatever paper bottle the soft-drink giant comes up with must be gas-tight enough to preserve the fizz as well as robust enough to survive transport and hold the CO2 pressure from the drink.

Paper with a Plastic Lining

img data-attachment-id="464729" data-permalink="https://hackaday.com/2021/04/23/paper-bottles-for-your-fizzy-drinks-and-bottle-rockets/paper-bottle-thumbnail/" data-orig-file="https://hackaday.com/wp-content/uploads/2021/02/paper-bottle-thumbnail.jpg" data-orig-size="600,600" data-comments-opened="1" data-image-meta='{"aperture":"0","credit":"","camera":"","caption":"","created_timestamp":"0","copyright":"","focal_length":"0","iso":"0","shutter_speed":"0","title":"","orientation":"0"}' data-image-title="paper-bottle-thumbnail" data-image-description="" data-image-caption="" data-medium-file="https://hackaday.com/wp-content/uploads/2021/02/paper-bottle-thumbnail.jpg?w=400" data-large-file="https://hackaday.com/wp-content/uploads/2021/02/paper-bottle-thumbnail.jpg?w=600" loading="lazy" src="https://hackaday.com/wp-content/uploads/2021/02/paper-bottle-thumbnail.jpg?w=400" alt="" width="400" height="400" srcset="https://hackaday.com/wp-content/uploads/2021/02/paper-bottle-thumbnail.jpg 600w, https://hackaday.com/wp-content/uploads/2021/02/paper-bottle-thumbnail.jpg?resize=250,250 250w, https://hackaday.com/wp-content/uploads/2021/02/paper-bottle-thumbnail.jpg?resize=400,400 400w" sizes="(max-width: 400px) 100vw, 400px"">PABOCO. They promise a sustainable polymer vapour barrier and a wood pulp bottle shell strong enough to take the knocks, and we suspect that the “Mobile connectivity to engage consumers to understand and ensure an afterlife” will probably be a QR code to connect with the bottle spirit world.

Right now that’s just a promise from the company. The current revision of the container technology uses a “a preliminary plastic barrier film”. Given that existing paper-based cartons can present a significant recycling challenge due to their inseparable composite nature, we hope that one recycling problem won’t simply be replaced with another.

However, the plan is to further develop the technology and replace that plastic barrier:

The first-generation concept will be partly renewable and fully recyclable, but it is the next and following paper bottle generations barriers that will create a truly sustainable alternative.

We’re looking forward to the first paper bottles reaching a retail shelf so we can have a look for ourselves.

Source : https://hackaday.com/2021/04/23/paper-bottles-for-your-fizzy-drinks-and-bottle-rockets/

1278
“Paper” Bottles For Your Fizzy Drinks (And Bottle Rockets)

Source:Hackaday

“Paper” Bottles For Your Fizzy Drinks (And Bottle Rockets)

“Paper” Bottles For Your Fizzy Drinks (And Bottle Rockets)

Source:Hackaday

“Paper” Bottles For Your Fizzy Drinks (And Bottle Rockets)